Carbon monoxide is the result of the incomplete burning of fuel, and its accumulation in the home during the winter months is a real threat to families and homeowners, which is why it is vital to maintain a carbon monoxide sensor and practice proper CO safety precautions.
Carbon monoxide is an odorless, colorless gas that can build up indoors and cause serious health problems for everyone in the home. One of the most common sources is a faulty furnace, so it’s worth scheduling a professional inspection before the cold season starts. Many local homeowners rely on heating services in San Jose to check for cracked heat exchangers, blocked vents, and other issues that can lead to dangerous leaks.
CO Season Starts the Week the Heat Comes On
There are more than 100,000 visits to the emergency department each year with issues related to CO poisoning, according to the CDC. Exposure becomes a risk as soon as the heat is turned on, which is why it is vital to have the proper CO detectors before winter and to know what to watch out for for adequate CO safety.
A properly functioning system should direct produced gases to the exterior of the home. However, blocked exhaust pathways or malfunctioning equipment can allow the entrance of CO into the interior of the home, where it poses a risk in confined spaces (even with windows open).
Thoughtful architectural design and meticulous maintenance of building systems are crucial for ensuring the health and safety of occupants. The integration of efficient ventilation and exhaust systems is a fundamental aspect of creating safe and sustainable living environments.
Symptoms of exposure can sometimes look similar to those of a cold or a flu, which is why they sometimes go unnoticed. Symptoms include nausea, dizziness, headaches, weakness, and confusion. Elderly people and children are especially vulnerable to CO exposure.
Most Home CO Problems Start in the Venting, Not the Flame
Even with a system that is working completely efficiently, blocked vents and exhaust pathways can pose a silent threat. The U.S. Consumer Product Safety Commission warns that defective, blocked, or disconnected venting can allow dangerous gases to accumulate indoors.
Here are some warning signs to look out for around your home:
- Blocked chimneys and flues: Bird nests, leaves, and other natural debris can accumulate and obstruct the pathways of exhaust gases.
- Loose vent connections: Disconnected or poorly fitting pipes can allow gas to escape inside.
- Corrosion or damage: Rust, cracks, and leakage apparent around chimneys or vent pipes may also be a culprit.
- Missing furnace panels: A missing furnace panel can also be an indicator of a greater problem that the equipment may need professional attention.
- Soot or unusual residue: If there are dark stains visible around any heating equipment or exhaust ventilation, this can indicate a malfunction or improper combustion or venting.
If you spot any of these issues, do not attempt to repair or handle fuel-burning equipment yourself. Have a qualified technician take a look at anything unusual.
California Already Requires the Alarm. Placement Is Where Homes Fall Short
Luckily, California Health and Safety Code Act 17926 requires carbon monoxide detectors to be present in homes that utilize fuel-burning heaters or appliances. However, simply owning one CO detector is not enough, and the National Fire Protection Association recommends that homeowners keep a detector near each sleeping area as well as on every level in the building, including the basement.
Considering the placement of safety devices like CO detectors is an integral part of interior planning and home design. Architects and designers play a key role in specifying and integrating these elements to meet both regulatory requirements and optimal safety standards across all residential spaces.
Each appliance comes with suggestions and instructions for where to place your detector, including distance from appliances, and it is important to adequately follow these instructions as well.
Once you have the proper CO detector setup, it is important to frequently and as needed replace batteries, check expiration dates, and test alarms.
A 10-Minute Check Before You Turn the Heat On
Before the temperature starts dropping, take a few minutes to review basic safety measures for your home. The following checklist can help you identify any issues that may need attention or a furnace inspection:
- Test each CO alarm and check its battery
- Confirm that alarms are installed outside sleeping areas and on each floor
- Check accessible exterior furnace and water heater vents for obstructions
- Look for rust, loose connections, or visible damage around accessible pipes
- Make sure pathways in fireplace flues or chimneys are clear
- Schedule an annual furnace inspection with a proper HVAC technician
- Review your family’s emergency plan, so everyone knows what to do in the case of an alarm sounding
The CPSC recommends annual professional inspection of fuel-burning heating systems. A technician can also check for issues in places that may be inaccessible to you.
In the case of a CO alarm sounding, get everyone who is in the house outside safely, and call 911 or the fire department. Do not go back inside until responders instruct you that it is safe.
Conclusion
Since CO hazards aren’t always visible or apparent, it is important to make sure your heating system is operating normally and be sure to follow proper CO safety procedures.
Before winter reaches its peak, consider scheduling a professional assessment. A professional assessment is simple and can give you greater confidence in your system and ease your concerns about you and your family’s safety this winter.