Buying new custom blinds for your home windows is exciting, but you need a steel measuring tape to make sure they fit. If you measure the blinds incorrectly, the gaps may let in light or scrape against the window frame. This can be very frustrating and may even damage your new blinds. In this article, you will get the best way to measure your windows when installing blinds.
1. Choosing Your Preferred Mounting Style
When you pull out your tape measure, you need to decide if you want an inside or outside mount. The inside mount is simply a window recess mount that is sleek and minimalist and highlights the woodwork. Outside the mount is a wall mount above the frame, making small windows look much bigger.
Selecting your mount style early determines where you will put your measuring tape later. An inside mount needs precision, and an outside mount has a little room for small calculation issues. This choice creates a clear path to a successful home improvement project.
2. Finding the Exact Recess Width
For an inside mount setup, you measure the horizontal width in the window frame in three different locations. Put your tape measure at the top, the exact middle and the bottom of the window opening. Write down each number carefully on a notepad to avoid forgetting the exact digits.
Order custom blinds Perth options using the smallest of these three horizontal measurements. Since windows are rarely square, the smallest width ensures your new shades roll up and down smoothly without jamming. This simple rule saves you from frustrating installation errors later.
3. Determining the True Frame Height
Like the width, you must measure it in three places: the left side, the middle and the right side. This step is when you catch any sloping problems caused by your house settling over time. For inside mounts, write down the longest of the three vertical numbers so your fabric reaches the windowsill perfectly.
When your blinds are too short, a strip of bright sunlight will be visible at the bottom all day. Accurate height checks ensure complete light control when you need it most.
4. Calculating Outside Mount Dimensions
The outer edges of your window trim are measured from side to side to establish your baseline width numbers. Add at least ten centimetres to this number in order to get the fabric to cover the wall evenly.
For the height, measure from your bracket position above the frame down to where you want the blind to drop. Add extra length to make sure the rolled-up fabric gets fully out of the window when you want to see the world outside. It makes your windows look quite fancy.
5. Checking for Internal Depth Obstacles
Neighbours often don’t think to check the depth of the window recess for hidden blocking hazards. Window handles, winding devices, locks, or security sensors that stick out into the open space are definitely things to check for. But these can easily snag your new fabric and scratch it over time.
The window frame should be deep enough to hold mounting brackets and not hang out. If you have a shallow recess, you will need to transition to an outside mount. These details help you avoid ordering unfit items.
6. Double-Checking Your Finished Numbers
The most fundamental rule of home measuring is to check all your final numbers at least twice before ordering. A quick remeasure takes only two minutes but prevents you from making any costly ordering mistakes. Always use a good steel tape measure instead of a soft fabric tape that can stretch and warp.
Set your dimensions down to the exact millimetre to get that perfect, professional finish that looks completely custom-made. Your patience here guarantees that you will find a beautiful outcome that you are going to love.
Managing Your Home Project Expenses Wisely
If you don’t pay attention to the window numbers, you could completely waste your home improvement budget. The only way to protect your hard-earned home improvement dollars is to keep them from going to waste.
If you want to buy high-end furniture for your home, you should measure it carefully instead of guessing. Keeping your money safe and doing home improvements right from the start is important.
